FAQ
Press the button on your UAVA 5 times to power on/off. The indication light will flash green when powered on, and red when powered off.
Attach a 510 cannabis cartridge and ensure your UAVA is powered on. Press the button on the UAVA while inhaling to consume. The indication light should match your selected heat setting.
Scan the QR code on the back of this card, directing you to the UAVA mobile app. If this doesn’t work, click the link below:
Once the app is downloaded, ensure your UAVA is powered on with a cartridge connected, and that Bluetooth pairing is turned on in your phone’s settings. Follow the in-app instructions to continue pairing to your UAVA.
Press the button on your UAVA 3 times to change heat settings. The indication light will flash green, blue, or red depending on your selected voltage.
= 2.8V
= 3.2V
= 3.6V
Ensure a cartridge is attached to your UAVA. If the indication light blinks red 10 times when pressing the button, your UAVA is out of battery and must be recharged.
If the indication light blinks Only 1 time when pressing the button, your UAVA is not sensing the attached cartridge. Try unscrewing and reattaching your cartridge, ensuring that it is fully screwed in. Additionally, ensure that both the UAVA and cartridge connection ports are clean and free of any oil that may be leaking, as this can block the electric current that is necessary to heat the cartridge.
The UAVA indication light blinks blue once when it senses a cartridge is attached, and also when a cartridge is detached. If your device does not blink blue when attaching a cartridge, it does not sense that the cartridge is attached. Try unscrewing and reattaching your cartridge, ensuring that it is fully screwed in. Additionally, ensure that both the UAVA and cartridge connection ports are clean and free of any oil that may be leaking, as this can block the electric current that is necessary to heat the cartridge.